Click on the image to check the artwork
10G UTP Cat.6A transparent boot Patch cord
Description:
Copperled s Category 6A patch cord consist of 4 twisted pairs of 24AWG stranded copper wires. These pairs are then cabled together, with different lay lengths to ensure optimum performance. Staggered pin RJ45 plugs, terminate the cable, and each lead is fitted with transparent boots, suitable for use in high density router or switch blades.
Features:
Specified to 500MHz
Suitable for 10 Gigabit, 10GBase-T, Ethernet application
ETL verified
Blade style 'slimline' moulded strain relief boot with clip protector
Choice of length and colour
PVC and LSZH for optional
25 year system warranty.
Mechanical characteristics:
Plug contact material: 50 inch gold plating over 100 inch nickel-plated copper alloy
Fire performance: IEC 332.1, VW1, IEC 332.3 versions available depending on jacket type
Product length: 0.5 to 100m (optional)
Cable to plug tensile strength: 9kgsf (90n) minimum
Minimum bending radius: 22mm
Storage temperature: -20 to +80 C
Durability: 750 mating cycles
Plug housing: UL 94-V0, UL 94-V2 and polycarbonate
Plug contact material: 50 inch gold plating over 100 inch nickel-plated copper alloy
Fire performance: IEC 332.1, VW1, IEC 332.3 versions available depending on jacket type
Product length: 0.5 to 100m (optional)
Electrical performance:
Contact resistance: 20m (maximum)
Voltage: 75V (maximum)
Dielectric strength: 1000V/ 1 minute min RMS
Current: 1.0A (maximum)
Insulation resistance: 500M minimum at 500V DC
Performance test: 100% patch cord test for CAT 6A, CAT 6 and optional for CAT 5e patch cord
Certifications: ETL, UL and REACH
RoHS Directive-compliant
Packing: 1 piece/bag
Production capacity: 20,000 pieces/day